|
1/10 Scale Nitro Touring Car:
Kyosho Fina BMW 320i BTCC - GP Mantis - 31731 - Radio Controlled ModelHistory and Info:
Released by Kyosho circa 1998, and now extremely rare, the Fina BMW 320i BTCC Touring Car - # 31731 - based on the Rear Wheel Drive version of the PureTen GP Mantis chassis, came 90% factory assembled, with an unpainted lexan polycarbonate Bodyshell, and a GX-12CR Engine with pull start. A Radio System, Fuel and Glow Starter to be purchased separately.
▼ Scroll Down for More Images ▼
|
|
★ Kyosho BMW 320i ★
★ Kyosho BMW 320i ★
★ Kyosho PureTen GP Mantis Chassis ★
★ Kyosho PureTen GP Mantis Chassis ★
★ Kyosho PureTen GP Mantis Chassis ★
★ Kyosho PureTen GP Mantis Chassis ★
★ Kyosho PureTen GP Mantis Chassis ★
★ Kyosho PureTen GP Mantis Chassis ★
★ Kyosho PureTen GP Mantis Chassis ★
★ Kyosho PureTen GP Mantis Chassis ★
★ Kyosho PureTen GP Mantis Chassis ★
★ Kyosho PureTen GP Mantis Chassis ★
★ Kyosho GX-12 Engine ★
|
Buying a Used Kyosho Fina BMW 320i BTCC
|
Manufacturers and Brands Catalogued, Listed and Reviewed by RC-Scrapyard.
At present, the RC Model Manufacturers, Brands and Distributors covered by us are: ABC Hobby, Academy, Acme Racing, Agama Racing, Amewi, Ansmann Racing, ARRMA, Team Associated, Atomic RC, Axial, AYK, Bolink, BSD Racing, Capricorn, Carisma, Carson, Caster Racing, Cen, Corally, Custom Works, Durango, Duratrax, ECX - Electrix, Exceed RC, FG Modellsport, FS-Racing, FTX, Fujimi, Gmade, GS-Racing, Harm, HBX, Helion, Heng Long, Himoto Racing, Hirobo, Hitari, Hobao, Hong-Nor, Hot Bodies, HPI, HSP, Intech, Integy, Jamara, JQ Products, Kawada, Kyosho, Losi, LRP, Maisto, Mardave, Marui, Maverick, MCD Racing, Megatech, Mugen, New Bright, Nichimo, Nikko, Nkok, Ofna, Pro-Pulse, Protech, PTI, RC4WD, Redcat Racing, RJ-Speed, Robitronic, Schumacher, Seben, Serpent, Smartech, Sportwerks, Step-Up, Tamiya, Team-C Racing, Team Magic, Thunder Tiger, Tomy, Top Racing, Traxxas, Trinity, Tyco, Vaterra RC, Venom, VRX Racing, WLToys, X-Factory, Xmods, Xpress, Xray, XTM, Yankee RC, Yokomo, ZD Racing and Zipzaps. |
Hints, Tips and Information
Preparing your New Nitro Engine
1/ New RC Gas Engines need running or "breaking" in before being used competitively. 2 or 3 tanks of fuel are usually enough, but don't over rev the engine and try to keep it cool, below 160 degrees F (71 degrees C) |
Hints, Tips and Information
Look after your Gears
In RC there are a number of different gear teeth sizes we tend to use, based on two systems. Imperial and metric. |
RC Models:
|
Radio & Motors: |
Other
Accessories: |