53Mhz Crystals
For RC Model Radio Systems - (Tx/Rx)

    Choosing the right Radio System for your requirements can be difficult for those new to RC. If you are unsure what System you should be looking for, check out my article "Choosing a Transmitter".

    You should also read my article How to avoid Interference", based on a number of tips I picked up from some of the top racers I encountered in my many years in the sport. These tips are useful to all forms of RC.

Hints, Tips and Information
For RC Enthusiasts

Radio Frequencies - be Careful be Safe

   Aimed primarily at those moving into Model Car club racing, but is a useful insight into all forms of RC, this article explains what you will need and all the precautions you should take to race safely.

   RC racing is a great sport for making friends and having fun, but if you don't follow the protocols you could find yourself causing havoc and making more than a few enemies.

   If you haven't got the right crystals, don't panic. The club organisers will only be too glad to help and find you something, all you have to do is ask.

How to avoid Radio Interference

   Radio Interference is common across all forms of RC. In this article I have listed a number of hints and tips, gained over my many years of experience in RC, explaining how by making a few simple changes to the positioning of your receiver, or using some electronic components, you can easily avoid and protect your model from Interference..

Servos for RC Models

   All Radio Controlled models need servos to control speed and direction. Choosing the right servo for each operation depends on a number of factors, including the scale of the model, robustness and response requirements.

   All the various versions of servos are described in this article, to give you some insight into what is available to suit your requirements.

Choosing a Transmitter

   As you progress past the initial RTR kit and supplied standard radio equipment, choosing a more advanced Radio Transmitter can be confusing for RC beginners, and can be an expensive waste of money if you don't get it right the first time.

   This article was written based on my own early experiences, hopefully to help those looking to advance in the sport, not make the mistakes I did.

More Hints and Tips

   For more Radio Controlled Model Hints, Tips and Information, check out the list on the RCScrapyard Homepage. ▶ ▶