Silverlit
RC Boat/Ship Models and Spares

Hints, Tips and Information
For RC Enthusiasts

How to avoid Radio Interference

   Radio Interference is common across all forms of RC. In this article I have listed a number of hints and tips, gained over my many years of experience in RC, explaining how by making a few simple changes to the positioning of your receiver, or using some electronic components, you can easily avoid and protect your model from Interference..

Servos for RC Models

   All Radio Controlled models need servos to control speed and direction. Choosing the right servo for each operation depends on a number of factors, including the scale of the model, robustness and response requirements.

   All the various versions of servos are described in this article, to give you some insight into what is available to suit your requirements.

Electric Motors for RC Models

   When I first started in RC, one of the most confusing things I had to learn was about Electric Motor Winds and Turns, and Advance and Retard, and the difference they make to the performance of the motor.

   Weather its more Torque you need from your Motor, or simply Revs Per Minute, this article explains what you should be looking for and how you can adjust your Motor for what you need.

Choosing a Nitro Engine.

   Choosing a Nitro Engine for your model can be difficult if you don't know what you are looking for. In this article I explain how the many different Engine types relate to your particular version of RC and point you in the right direction to find the right Engine for you.

How to Charge Rechargeable Batteries

   In the ever changing world of Rechargeable Batteries, this article was written to explain the best methods of charging the different Battery versions and how they should be safely stored or discharged.

   Although related primarily to my own Model Car background, the information in this article is useful for all forms of RC.

Soldering Battery Packs Safely

   Battery Cells are delicate things, and when it comes to Soldering them in series to make up a specific form of pack, there are precautions you need to take to avoid reducing their efficiency or damaging the cells, rendering them useless.

   In this article I simply explain how to do it right.

More Hints and Tips

   For more Radio Controlled Model Hints, Tips and Information, check out the list on the RCScrapyard Homepage. ▶ ▶