|
1/10 Scale Electric Rock Crawler:
BSD Racing BS703T (Radio Controlled Model Review)History and Info:
Originally introduced by BSD Racing in some countries circa 2010, the BS703T Rock Crawler is an upgraded version of the the BS702T, an originally came with the same camouflage painted bodyshell. The BS703T was later upgraded and released with a blue painted VW Beetle bodyshell, a 2.4Ghz Radio System, a 540 Brushed Motor, 7.2V Ni-Mh Battery, Charger and 2 x 9KG Servos (Specifications may vary from country to country).
▼ Scroll Down for More Images ▼
|
|
★ Team BSD Racing Rock Crawler ★
★ Team BSD Racing Rock Crawler Chassis ★
★ Team BSD Racing Rock Crawler Chassis ★
★ Team BSD Racing Rock Crawler ★
★ Team BSD Racing Rock Crawler Chassis ★
★ Team BSD Racing Rock Crawler Chassis ★
★ Team BSD Racing Rock Crawler ★
★ Team BSD Racing Rock Crawler Chassis ★
★ Team BSD Racing Rock Crawler Chassis ★
|
Buying a Used BSD Racing Rock Crawler (and What to look for)
Make a General Visual Inspection
Check the Body-Shell
If the body shell of your Rock Crawler is broken, ripped or damaged in any way, this can be easily repaired with rubber solution glue. Also, for added protection and if available for your model, fit an under guard to stop dirt and gravel entering the chassis. Drive Shafts and Turnbuckles
Examine the Drive System
The gearbox of your used Rock Crawler should be opened up to check for damaged gears and wear. If there is excessive backlash in the gearing, these should be replaced. A thin coat of grease on the gears is enough to allow smooth operation and reduce further wear. Pinions and Spur Gears
Steering Servo and Servo-Saver
Don't Forget those Bearings
|
Manufacturers and Brands Catalogued and Listed by RC-Scrapyard.
At present, the RC Model Manufacturers, Brands and Distributors covered by us are: ABC Hobby, Academy, Acme Racing, Agama Racing, Amewi, Ansmann Racing, ARRMA, Team Associated, Atomic RC, Axial, AYK, Bolink, BSD Racing, Capricorn, Carisma, Carson, Caster Racing, Cen, Corally, Custom Works, Durango, Duratrax, ECX - Electrix, Exceed RC, FG Modellsport, FS-Racing, FTX, Fujimi, Gmade, GS-Racing, Harm, HBX, Helion, Heng Long, Himoto Racing, Hirobo, Hitari, Hobao, Hong-Nor, Hot Bodies, HPI, HSP, Intech, Integy, Jamara, JQ Products, Kawada, Kyosho, Losi, LRP, Maisto, Mardave, Marui, Maverick, MCD Racing, Megatech, Mugen, New Bright, Nichimo, Nikko, Nkok, Ofna, Pro-Pulse, Protech, PTI, RC4WD, Redcat Racing, RJ-Speed, Robitronic, Schumacher, Seben, Serpent, Smartech, Sportwerks, Step-Up, Tamiya, Team-C Racing, Team Magic, Thunder Tiger, Tomy, Top Racing, Traxxas, Trinity, Tyco, Vaterra RC, Venom, VRX Racing, WLToys, X-Factory, Xmods, Xpress, Xray, XTM, Yankee RC, Yokomo, ZD Racing and Zipzaps. |
Hints, Tips and Information Make your RC Model Ball Bearings Work for You
If you are serious about your racing, looking after your bearings is essential if you are to remain competitive. |
Hints, Tips and Information
Choosing the right Tire Inserts
Once upon a time, all RC model tires were equal - they were all trash. None of the old tires had any kind of internal support, because the hard compound they were made of didn't need it. But that was before the newer soft compounds were developed. These new tires were so soft that if some kind of insert was not used they would just lay flat under the weight of the car. Thus, the new science of tire inserts was born. Inserts for Off-Road Tires
The basic soft foam inserts that come with many off-road rubber tires can be in one of two types. They can be basic rings of sponge, or the cheap and nasty strips of sponge. Many of the latest foam inserts now come pre-shaped, but more than often, they will need some work done to them before they are inserted into the tires. |
RC Models:
|
Radio & Motors: |
Other
Accessories: |